AL-602-02-868 EnoPuck® CO2 WALL / CE – EnOcean CO2 sensor and LED display

EnoPuck CO2 WALL: The CO2 traffic light “EnoPuck CO2” has been supplemented with a mounting ring for the wall and the appropriate holders on the device especially for front wall mounting.

In addition, the power supply is provided via a twin stranded wire, which is routed out of the back of the device, instead of the socket on the side. This allows the EnoPuck CO2 WALL to be mounted on a flush-mounted box and the associated power supply unit to be placed in it (not included).

The device is supplied with the matching flush-mounted power supply unit. Unlike many other solutions, the bright RGB LEDs make the light signal clearly visible at all times, even from a greater distance.

The CO2 measured value is measured and displayed in the individual solution in the form of a traffic light (green/yellow/red), whereby the limit values can be configured using the BL-PC-FLEX-2 software. The integrated motion detector also enables the LEDs to be switched off when nobody is in the room.

Available certifications / frequencies:

  • CE, FCC, NCC, KC
  • Product No. 12433 AL-602-02-868 EnoPuck® CO2 WALL / CE (868,3 MHz)
  • Manufacturer DEUTA Controlshttps://www.deuta-controls.net
  • Category Air quality (T/H, CO2, TVOC, PM, dB, ..), Occupancy (Room, Desk, Chair, Bed), Temperature (Air, Liquids, Materials)
  • Frequency 868MHz (ASK): EU (and potentially others e.g. Non-EU Europe, China, Singapure…)
  • RX-EEP F6-02-01, F6-02-02, F6-02-03, A5-07-01, A5-07-02, A5-07-03, A5-06-01, A5-09-04
  • Certification Certified Level 2

Downloads

AL-602-02-868 EnoPuck® CO2 WALL / CE – EnOcean CO2 sensor and LED display