EnOcean Wireless Temperature Sensor

Measure and monitor changes in ambient temperature in each room, cabinet or zone, in real time Our wireless temperature sensors measure the ambient temperature in each room, cabinet or zone. The small, solar-powered sensors use ultra-low power wireless technology, making them easy to install and very low maintenance. Optional battery back-up available for low-light environments.

EPACA – EnOcean People Activity Counter (868 MHz)

The ceiling mounted sensor is detecting people motion activity in the sensing range underneath the sensor. The device is wireless and solar-powered, so no batteries are needed under typical light conditions and easiest to mount also in retrofitting.

EOSWA – Wall Mounted Occupancy Sensor (868 MHz)

Wall-Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects that

EMSIA – IoT Multisensor (868 MHz)

The EnOcean multisensor enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

ETHSA – Temperature & Humidity Sensor (868 MHz)

ETHSx is a wireless temperature & humidity sensor for EnOcean systems. Powered by a solar cell, it works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted. The small housing can easily be mounted to verti-cal walls or furniture using

Eltako Wireless 4-way pushbutton in E-Design55 F4T55E-

Wireless 4-way pushbutton in E-Design55, 80×80 mm external dimensions, internal frame dimensions 55×55 mm, 15 mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless 2-way central control pushbutton in ­E-Design55 F2ZT55E-

Wireless 2-way pushbutton in E-Design55, 80×80 mm external dimensions, internal frame dimensions 55×55 mm, 15 mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. With rocker laser engraved.

Eltako Wireless 2-way pushbutton in E-Design55 F2T55E-

Wireless 2-way pushbutton in E-Design55, 80×80 mm external dimensions, internal frame dimensions 55×55 mm, 15 mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless 1-way pushbutton in E-Design55 F1T55E-

Wireless 1-way pushbutton in E-Design55, 80×80 mm external dimensions, internal frame dimensions 55×55 mm, 15 mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Feller EDIZIOdue EnOcean wireless pushbutton, double rocker olive

Feller EDIZIOdue wireless and battery-free pushbutton for surface- (tape/screws) and flush-mounted installations. Customized printings and symbols can be ordered via Feller online-catalogue. Available in 12 different colors; white, black, dark grey, light grey, silver, vanilla, olive, berry, crema, lemon, coffee and sand. The design is compatible with 15 EDIZIOdue prestige high-end frames.