Hotel Key Card Reader

The new ILLUMRA wireless Key Card Reader automates hotel room energy conservation by disabling HVAC and lighting in unoccupied rooms. The device installs in minutes without wires or batteries, minimizing installation, clean-up and downtime costs. Further information

Eltako 1- and 2-level wireless repeater FRP61-230V

1 and 2 level wireless repeaters. Only 0.7 watt standby loss.

Eltako Wireless level meter Probare P10

The wireless field test tool Probare P10 is a portable field tester which shows the signal quality of the received EnOcean 868MHz telegrams. Additionally it helps to determine the best place for EnOcean transmitters, receivers or repeaters, it can also help to look if any signals are sent or not.

Eltako 1- and 2-level wireless socket repeater FSRP-230V

1- and 2-level wireless socket repeater. Only 0.7 watt standby loss.

Eltako Wireless window/door contact with energy generator FTKE-rw

48 x 32 x 11.5 mm, pure white. Also for ­monitoring of drawers and other mobile equipment. Generates the power for wireless telegrams itself when the lever is pressed, therefore there is no battery, no connecting wire and no standby loss. Fixing by gluing, screwing or with mounting brackets BW3. A wireless telegram is sent when a window is opened

Eltako Wireless position switch, blue, without battery or wire FPE-1

Wireless position switch with energy generator 48 x 32 x 11.5 mm, blue. Generates the power for wireless telegrams itself when the lever is pressed, therefore there is no battery, no connecting wire and no standby loss. When pressing the operating lever a wireless telegram Data (hex) 0x10 is sent and when releasing Data (hex) 0x00 is sent, like a

Eltako 1- and 2-level wireless repeater FRP70-230V

1 and 2 level wireless repeater with small antenna and with antenna FA250. Only 0.6 watt standby loss. A wireless antenna FA250 or FAG55E- is connectable as required.

Eltako 1- and 2-level outdoor wireless repeater FARP60-230V

Outside wireless repeater 1 and 2 levels, 60 x 46 mm, 30 mm deep. Only 0.7 watt standby loss.

Eltako Wireless infrared converter with USB port FIW-USB

Wireless infrared converter with USB port for the universal remote control Logitech Harmony Touch (available from specialist retailers). Only 0.05 watt standby loss. With a special Eltako FIW data record, the infrared signals are converted into wireless telegrams by a wireless infrared converter FIW-USB and transmitted to the Eltako wireless network. Either connect to a

Eltako Wireless 50-way remote control with display and ­rechargeable battery. With wall holder and charger FFD-al/anso

Wireless 50-way remote control with display 185 x 50 mm, 17 mm high. Power is supplied by lithium-ion battery whose voltage is monitored and shown in the display. With charger, wall holder WHF-al and 2 stainless-steel countersunk screws 2.9 x 25 mm and plugs 5 x 25 mm.