Vacuum leak detector Eurovac

Application Class I vacuum type leak detector according to EN 13160 for safe monitoring of double-walled tanks and single-walled tanks with inner lining for the storage of water-polluting liquids with a flash point > 55 °C as well as AdBlue® (urea solution 32.5 %) according to DIN 70070. The broad voltage range (AC 100–240 V)

Oil-Water Warning Indicator ÖWU

Application For visual and audible alarms if liquids with a flash point of > 55 °C are detected. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, gearbox oils or hydraulic oils, vegetable oils and transformer oils. Description Alarm unit in wall mounting housing for early detection of

Oil-Water Warning Device ÖWWG 3

Applications For visual and audible alarms if liquids with a flash point of > 55 °C are detected in, for example, oil storage rooms, drip pans, inspection ducts, ducts, protective pipes, manholes, pipes and cellars. Suitable for the following media: water, fuel oil, diesel fuel or low-viscosity lubricating oils, motor oils, hydraulic oils, vegetable oils

Omnio window contact 1-channel FK101

The Omnio window contact FK101 1-channel is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. Typical application examples can be to turn off the heating while windows are open or to raise the blinds when sliding door opens. The window contact FK101 consists of a transmitter module driven by

Omnio Window Handle FG201

The Omnio window handle FG201 is a battery less, maintenance-free and wireless transmitter to monitor the state of windows. It is able to detect the state “window opened”, “window closed” and “window tilted”. This handle has no lock and it can be mounted instead of the normal window handle.

WaterSensor con

Application For the detection of accumulations of water at defined horizontal surfaces or positions (e.g. in the area of fittings washing machines, coffee makers with water connection, etc.). Suitable for water. Description WaterSensor con features a conductivity sensor at the bottom. The energy required to send an EnOcean® telegram is generated by means of an

Universal Radio Transmitter FTM

Application Monitoring of the switching states of voltage-free contacts. In addition, transmission of ambient temperature. Description The universal wireless transmitter can integrate any device with a voltage-free contact into a building automation system. Examples comprise the alarm relays of heating systems or status messages of alarm systems. The voltage-free contact is supplied with voltage by

Temperature Sensor FTM T

Application Determination of the ambient temperature and air humidity at a defined location. Description The temperature sensor FTM T transmits the current ambient temperature via the integrated EnOcean® wireless module to the AFRISOhome gateway. The temperature and humidity sensor FTM TF also transmits the value of the current air humidity. Based on the event message,

Temperature and Humidity Sensor FTM TF

The temperature and humidity sensor FTM TF cyclically measures the ambient temperature as well as the air humidity and sends a wireless EnOcean message. Mounting by means of simply placing, gluing, screwing or fixing with cable ties. An integrated photovoltaic cell supplies the required power. An optional battery can be used for application in darker

Ethernet Interface Receiver

Receiver interface between radio sensors, respectively keys, based on EnOcean RF technology and controllers, respectively control systems, with Ethernet interface. Further information