BSC EnOcean 3.0 Reference Design

The BSC EnOcean 3.0 reference design is the heart of maintenance-free, secure IoT sensors. It enables cost-effective direct integration of an EnOcean 3.0 wireless interface with microprocessor into customer-specific wireless sensors. The reference design is designed for lowest power consumption in stand-by mode to realize maintenance-free end products. Due to the compact design, ultra-flat sensor

Wireless Switch Module

The ZF 2 way radio switch module is designed for use in wireless switches and remote controls without batteries. It can be used in building technology for light and shutter control or in industrial automation. The wireless switch module enables radio communication with EnOcean receivers and operates via radio according to the EnOcean Alliance Radio

PTM 215J – Wireless Switch Module with NFC (928 MHz)

PTM 215J is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. Product comes with NFC interface for commissioning and encryption mode with transmission of the sequence counter “RLC” in every telegram. For details see: https://www.enocean.com/en/products/enocean_modules_928mhz/ptm-215j/

PTM 215U – Wireless Switch Module with NFC (902 MHz)

PTM 215U is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. Product comes with NFC interface for commissioning and encryption mode with transmission of the sequence counter “RLC” in every telegram. For details see: https://www.enocean.com/en/products/enocean_modules_902mhz/ptm-215u/  

PTM 202 – Toggle Switch Transmitter Module (868 MHz)

The toggle switch transmitter module PTM 202 enables the setup of intuitive and easy to use self-powered switches. PTM 202 module is powered by an electro-dynamic generator and therefore maintenance-free. It can be combined with existing PTM 210 switch designs (55 mm standard insert). PTM 202 is designed to enable wireless switches with focus on

KNX RF/ENO Push Button 440 secure

The KNX RF/ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

PTM 210 – Wireless Switch Module

The PTM 210 is a e miniaturized batteryless switch modules (40 mm x 40 mm x 11.2 mm) which allow the realization of very slim on-wall mountable rocker switches or remote controls. Optionally, one or two switch rockers or up to four push buttons can be realized.

PTM 215 – Wireless Switch Module with NFC

PTM 215 is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. The actuating force is typically 9 N only over a travel of 1.8 mm. Optionally, one or two switch rockers or up to four

STM 550 – Multisensor Module (868 MHz)

STM 550 enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

Eltako Wireless pushbutton insert EnOcean, encrypted, with mounting base and attachment frame FTE215

Wireless pushbutton insert with EnOcean energy generators for wireless pushbuttons made by other manufacturers. Generates the power for wireless ­telegrams itself when the button is pressed, therefore there is no ­connecting wire and no standby loss. The scope of supply comprises the mounting base and an attachment frame for FT55 with EnOcean module inserts PTM215