AL-432-00-902 EnoSense® PIR Ceiling / FCC – EnOcean Motion sensor

The AL-432-00-921 EnoSense® PIR Ceiling contains a high sensitive PIR sensor that detects moving people in range. Best case, the sensor is supplied with energy by the integrated solar cell in the front. In situations where the ambient light is not sufficient, an internal battery supplies the sensor energy storage for typically 5 years or

AL-431-00-902 EnoSense® WALL+DESK / FCC – EnOcean sensor for desksharing

This small EnOcean sensor is powered by its integrated solar cell and supplies its measured values at configurable intervals. The sensor, which is snapped into a housing, is attached with a double-sided adhesive pad, preferably on the table top at a corner of the workstation. Depending on the colour of the desk, the sensor is

AL-436-00-902 EnoSense® People Counter / FCC – EnOcean People counting

This easy-to-install sensor for counting people passing by is powered by two AA batteries and transmits its data wirelessly with every counting event. The sensor is attached to the door frame above the door, preferably on the hallway side, using a double-sided adhesive pad (included). Depending on the color of the door frame, the sensor

AL-512-00-902 EnoDisc® / FCC, EnOcean radio receiver and transmitter

The EnoDisc® is an EnOcean transceiver for smart spaces that communicates via Ethernet and is powered via PoE (Power Over Ethernet). The three-part housing consisting of base, lower part with RJ45 or LSA connection and cover with the electronics allows easy installation. As soon as a connection has been established via port 8424, the EnoDisc®

AL-602-01-902 EnoPuck® CO2 / FCC – EnOcean CO2 sensor and LED display

The ‘EnoPuck CO2’ CO2 traffic light can be used both as a stand-alone solution and in conjunction with a building automation system. Thanks to the bright RGB LEDs, the light signal is clearly visible at all times, even from a greater distance, unlike many other solutions. The CO2 measured value is measured and displayed in

AL-602-04-902 EnoPuck® CO2 WALL / FCC – EnOcean CO2 sensor and LED display

EnoPuck CO2 WALL: The CO2 traffic light “EnoPuck CO2” has been supplemented with a mounting ring for the wall and the appropriate holders on the device especially for front wall mounting. In addition, the power supply is provided via a twin stranded wire, which is routed out of the back of the device, instead of

AL-602-01-921 EnoPuck® CO2 / TAIWAN – EnOcean CO2 sensor and LED display

The ‘EnoPuck CO2’ CO2 traffic light can be used both as a stand-alone solution and in conjunction with a building automation system. Thanks to the bright RGB LEDs, the light signal is clearly visible at all times, even from a greater distance, unlike many other solutions. The CO2 measured value is measured and displayed in

AL-432-00-921 EnoSense® PIR Ceiling / TAIWAN – EnOcean Motion sensor

The AL-432-00-921 EnoSense® PIR Ceiling contains a high sensitive PIR sensor that detects moving people in range. Best case, the sensor is supplied with energy by the integrated solar cell in the front. In situations where the ambient light is not sufficient, an internal battery supplies the sensor energy storage for typically 5 years or

AL-432-00-921 EnoSense® PIR Ceiling / KOREA – EnOcean Motion sensor

The AL-432-00-921 EnoSense® PIR Ceiling contains a high sensitive PIR sensor that detects moving people in range. Best case, the sensor is supplied with energy by the integrated solar cell in the front. In situations where the ambient light is not sufficient, an internal battery supplies the sensor energy storage for typically 5 years or

AL-431-00-921 series / TAIWAN – EnoSense® WALL+DESK EnOcean Sensor for desksharing

This small EnOcean sensor is powered by its integrated solar cell and supplies its measured values at configurable intervals. The sensor, which is snapped into a housing, is attached with a double-sided adhesive pad, preferably on the table top at a corner of the workstation. Depending on the colour of the desk, the sensor is