z.B. Europa, China

Omnio flush-mounted switching actuator 1-channel UPS230/08

The Omnio flush-mounted switching actuator 1-channel UPS230/08 is a device for switching electrical loads. Its potential free output is able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled switch (AW23/24/25), window

Omnio Room Sensor RTF161

The Omnio room sensor RTF- 161 is a battery less, maintenance-free and wireless sensor to measure temperature (0…40 °C) and humidity (0…100 %rH) indoors. The temperature can be set with its operation elements (set point). It is able to transmit temperature, humidity and set point via radio to Omnio thermostat actuators and gateways. The RTF-

Omnio Room Sensor RTF160

The Omnio room sensor RTF- 160 is a battery less, maintenance-free and wireless sensor to measure temperature (0…40 °C) and humidity (0…100 %rH) indoors. The measured value is transmitted wireless to Omnio thermostat actuators and gateways. The RTF160 is characterised by its excellent long-term stability and thanks to the built in solar cell it is

Omnio flush-mounted multi switching actuator 2-channels UPS230/12

The Omnio flush-mounted multi switching actuator 2-channels UPS230/12 is a device for switching electrical loads. Its two potential free outputs are able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled switch

Omnio weather evaluation unit XFJ

The Omnio weather evaluation unit XFJ is able to convert the captured weather data into EnOcean telegrams. This way blinds can be pilot-controlled and protected against thunderstorms. The following individual signals are available: Channel 1: Weather raw data for higher-level systems according to EEP A5-13-01… 06. Channel 2: Alarm due to failure of the weather

Omnio handheld transmitter 4-channels R101

The Omnio handheld transmitter 4-channels R101 is a universally applicable battery-less and maintenance-free wireless switch with four independent individual keys. Due to its highly ergonomic shape it rests comfortably in ones hand. The power comes from a small energy converter based on the induction principle.

WaterSensor con

Application For the detection of accumulations of water at defined horizontal surfaces or positions (e.g. in the area of fittings washing machines, coffee makers with water connection, etc.). Suitable for water. Description WaterSensor con features a conductivity sensor at the bottom. The energy required to send an EnOcean® telegram is generated by means of an

Omnio Key-Card-Switch 1-channel KSM

The Omnio key card switch 1-channel KSM is a self-powered and maintenance-free radio transmitter. It can be used as a main switch for lighting, heating and blinds in hotel-, school- and conference rooms as well as in offices. To fix with screws or adhesive pad.

Akktor Facility Automation

Control software for lighting, blinds and room temperature, for smart metering and for complex heating systems.

Omnio wall mounted transmitter 4-channels WS-102

The Omnio wall mounted transmitter 4-channels WS-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line. To install with screws or adhesive foil. Optional mounting plates allow mounting in different combinations.