z.B. Europa, China
ALADIN Turo multisensor / wireless
Temperature / brightness / humidity / acceleration Energy self-sufficient multi-sensor for recording temperature, brightness, humidity and acceleration. The energy supply is provided by an indoor solar cell. The sensor can be fitted with a button battery for use in darker rooms. The ALADIN Turo multisensor was developed in the same design as the ALADIN Turo
DEA DevKIT BSCiDEA
Dielectric Elastomer Actuators, known for their capacity to transform electrical energy into linear motion, represent a potential game-changer in the realm of IoT actuators. Unlike conventional electric motors, these elastomers operate with minimal energy consumption and exhibit remarkable resilience to environmental factors like temperature and vibration. The BSCiDEA Development Kit is poised to provide not
ALADIN wireless pushbutton / 1-fold / 2-fold / all colors
Works without wiring and without battery by pressing the rocker and is completely maintenance-free. The wireless pushbutton sends via 868MHz an EnOcean protocol. Example Product: ALADIN wireless pushbutton / 1-fold / white / unprinted
ALADIN LED dimming receiver 1 channel / with extension / 230V / UP / 300651
For dimming and switching LEDs (230V) ALADIN dimming receiver for LED lights (230V). For dimming and switching of dimmable 230V LEDs, halogen and incandescent lamps. Control via ALADIN radio transmitter, or via extension unit (for wired pushbuttons), phase cut-off dimmer for loads „LED/R/C“, soft start to protect the luminaires, bidirectional with status info, various setting
ALADIN blind receiver / STAK-STAS Hirschmann, 230V / 300635
For blinds, shutters, awnings / 1 motor Blind radio receiver with connection STAK3 / STAS3 for controlling blinds, shutters and awnings and other electrical consumers (1 motor). The installation can be done in a simple way in the shutter box (note possible radio shielding by metal). The radio receiver can be individually controlled by various
ALADIN EnO receiver, 2-channel / 24V / 300671
For small voltage systems, lighting etc. 2-channel radio receiver (24V) for switching extra-low voltage equipment, lighting and other electrical consumers. Each channel can be individually controlled with div. ALADIN transmitters and assigned with different functions and parameters (up to 90 different settings). Several transmitters with different functions can be stored on the same channel. The
ALADIN EnO receiver, 2-channel / 12V / 300767
For light / ventilation and general controls 2-channel radio receiver (12V) for switching low voltage equipment, lighting and other electrical consumers. Each channel can be individually controlled with div. ALADIN transmitters and assigned with different functions and parameters (up to 90 different settings). Several transmitters with different functions can be stored on the same channel.
ALADIN EnO heating recipient, 1-channel / potential-free / 230V / 300683
For heaters and cooling 1-channel radio receiver (potential-free) for controlling heating and cooling systems and other electrical consumers. The receiver can be controlled via an ALADIN radio thermostat or multisensors and assigned different functions and parameters (up to 30 different settings). For a quick system test, control via radio pushbuttons is also possible. The teach-in
Wireless Switch
LD-AS is a wireless switch with relays that uses EnOcean wireless communication. The switch can be installed in a concealed box, connected to zero-fire wire, and comes in three models with 1, 2, and 3 relays. The switch can be paired with an EnOcean wireless passive switch, and control can also be achieved through the
ALADIN EnO DALI control, broadcast / 300505
For DALI controls for lighting The ALADIN EnO DALI Controller (DALI Master) switches and dims lighting via DALI bus with commands from ALADIN transmitter. The controller is controlled via ALADIN wireless pushbuttons, motion detectors, door contacts, etc. (all work without wiring and without battery). Up to 18 DALI operating devices (slaves) can thus be controlled