z.B. USA, Canada

Distech Controls EDWSU-W Door/ Window Contact

The Door/Window Sensor can be easily mounted on any standard door or window frame to enable occupancy based control of lighting, HVAC and miscellaneous electric loads. The sensor uses radio frequency technology to communicate wirelessly with other EnOcean-based devices whenever it detects that a door or window has been opened or closed. For maximum efficiency

Distech Controls EOSCU-W Sensor Ceiling Mounted

Saving energy without sacrificing comfort can be effortless with occupancy based controls. The Ceiling Mounted Occupancy Sensor enables a new level of energy saving control for rooms, hallways and other common areas.

ESRPU-W / EDRPU-W (single, double) Self-powered, Wireless Switch

Self-powered wireless controls are simple to install. The wall switch use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.

Distech Controls EOSWU-W Occupancy Sensor Wall Mounted

Saving energy without sacrificing comfort can be effortless with occupancy based controls. The Wall-Mounted Occupancy Sensors are wireless and self-powered making them one of the most cost-effective ways to control energy-use in unoccupied rooms.

Photo Sensor

The TAP-31 (Task Ambient Photo) sensor is designed to provide a reliable and simple method of increasing energy savings by adding daylight harvesting to your Echoflex lighting and control system. It adds an exterior light level monitoring up to 65,535 lux (6,090 fc), making the sensor suitable for both closed and open loop daylighting applications.

TCM 515U – Transceiver Module for Gateways, Actuators and Controllers

The TCM 515U product family enables the realization of transceiver gateways, actuators and controllers for systems communicating based on the EnOcean radio standard. Compared to the current TCM 300U generation, TCM 515U provides significantly reduced power consumption, smaller size and higher processor performance. Security processing including is fully integrated without the need for external components.

SensHub EnOcean Sensor Gateway

The Lehigh SensHub is an EnOcean to Lehigh control systems gateway which acts as an interface between EnOcean wireless sensors and Lehigh’s Solitaire, Impress DMX or E-Flex lighting control systems. The SensHub connects to the Impress or FlexNet networks. SensHub Models: SensHub for E-Flex (H10023) SensHub for Solitaire/DTM (H10024) SensHub Repeater (H10026)

Mobile App Gateway

The ILLUMRA Mobile Commissioning System includes an ILLUMRA Mobile Commissioning Gateway and the Scan & Link app, and is designed to support the installation of wireless controls from the planning phase to the completion of a project, and supports adjustments to behavior and zoning even after a project is complete. Download the app on your iOS or Android smartphone.

BACnet Gateway

The ILLUMRA BACnet Gateway is your network’s intelligent wired and wireless controller; a wireless transceiver for 902MHz EnOcean and Zigbee devices. It is programmable for more precise and autonomous local control. It is also a complete and automated BACnet gateway. The gateway has an aesthetic look similar to a router, allowing for in-room deployment. Points visible through BACnet® Wireless control

8 Channel Low Voltage Controller

The 8 Channel Low Voltage Controller connects wireless light switches and sensors to new or existing control systems. This low voltage on/off controller responds to up to 80 different transmitters and provides 8 output channels (dry contact or 8-30V for relay and contractor applications). The outputs can be programmed as either momentary or maintained contacts.