z.B. USA, Canada

SED-LC347 Lighting load controller 120/277/347VAC

The load controller is a versatile control device used for applications such as ON/OFF lighting, timed light switch, daylight harvesting, photo inhibit, and occupancy or vacancy based lighting control. Other vertical market applications include process control and hospitality applications. The controller supports radio range confirmation, which allows installers to test signal strength for optimal sensor

SED-LC277 Lighting load controller 24VAC-277VAC

The load controller is a versatile control device used for applications such as ON/OFF lighting, timed light switch, daylight harvesting, photo inhibit, and occupancy or vacancy based lighting control. Other vertical market applications include process control and hospitality applications. The controller supports radio range confirmation, which allows installers to test signal strength for optimal sensor

SED-LLS Light level sensor

This photo sensor provides a reliable and simple method to increase energy savings by adding daylight harvesting to your wireless lighting control system. The device controls a single lighting controller or groups of controllers for switching or dimming zone control in relation to the natural light contribution in the area. Batteries are not required due

SED-P120 Plug-in light relay

The plug-in relay receiver provides ON/OFF control of lamps and other devices. Operation involves plugging the cord of an electrical device into the receiver, and then plugging the receiver into a standard electrical outlet. The device can be controlled using self-powered wireless light switches or sensors.

SED-THF Temperature and humidity sensor with setpoint and fan speed control

These temperature and relative humidity sensors provide a reliable and simple method to set up intelligent automation of interior spaces for energy savings. These sensors are suitable for Variable Volume Temperature (VVT) or Variable Air Volume (VAV) forced air systems. The device is capable of operating up to 200 hours in darkness from maximum charge

SED-T00 and SED-TH0 Temperature sensors with humidity option

These temperature and relative humidity sensors provide a reliable and simple method to set up intelligent automation of interior spaces for energy savings. These sensors are suitable for Variable Volume Temperature (VVT) or Variable Air Volume (VAV) forced air systems. The device is capable of operating up to 200 hours in darkness from maximum charge

SED-3R and SED-5R Light relay receivers

The relay receiver controls lights or other loads by responding to EnOcean signals from self-powered wireless light switches and/or other compatible transmitters. The relay receiver mounts to junction box knockout holes or inside wiring cavities for maximum wireless range.

SED-WDS Window and door contact sensor

The device can be easily mounted on any standard door or window frame to enable occupancy based control of lighting, HVAC, and miscellaneous electric loads. The sensor uses radio frequency technology to communicate wirelessly with other EnOceanbased devices whenever it detects a door or window has been opened or closed. The sensor is completely self-powered

SED-CMS Ceiling mounted occupancy sensor

The ceiling mounted sensor enables a new level of energy saving control for rooms, hallways, and other common areas. The sensor uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices to scale back temperature and turn-off lights when a space is unoccupied for a set period of time. The sensor is self-powered by

SED-WMS Wall mounted occupancy sensor

The wall mounted sensor is wireless and self-powered making it one of the most cost-effective ways to control energy-use in unoccupied rooms. The device can be installed in minutes as they are wireless and do not require batteries. The device harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with