AL-443-00-868 EnoSense® LUX / CE – Precise ambient light sensor
Our new sensor works with an internal battery for use in any ambient light situation. The EnoSense® LUX transmits its current measured value every 15 minutes, and even every minute if there is a change. With its stylish design housing, it fits unobtrusively on any wall and is only 81 x 41 x 9 mm
AL-435-00-868 EnoSense® Temp/RH / CE – Precise EnOcean Sensor for temperature and humidity
Our new EnOcean temperature sensor works with an internal battery for use in any ambient light situation. In addition to temperature, it also measures relative humidity. The EnoSense® Temp/RH sends its current measured values every 15 minutes, and even every minute if there is a change. With its stylish design housing, it fits unobtrusively on
AL-437-03-868 EnoSense® DESK / CE – Optimized EnOcean Sensor for desksharing
Compared to the EnoSense® WALL & DESK, our new sensor has a motion detector (PIR) in addition to a vibration sensor. This enables it to detect movements below the edge of the desk and recognise people even if they do not touch the desk for a longer period of time due to their activity. It
AL-431-00-868 EnoSense® WALL+DESK / CE – EnOcean Sensor for desksharing
This small EnOcean sensor is powered by its integrated solar cell and supplies its measured values at configurable intervals. The sensor, which is snapped into a housing, is attached with a double-sided adhesive pad, preferably on the table top at a corner of the workstation. Depending on the colour of the desk, the sensor is
AL-432-00-868 EnoSense® PIR Ceiling / CE – EnOcean Motion sensor
The AL-432-00-868 EnoSense® PIR Ceiling contains a high sensitive PIR sensor that detects moving people in range. Best case, the sensor is supplied with energy by the integrated solar cell in the front. In situations where the ambient light is not sufficient, an internal battery supplies the sensor energy storage for typically 5 years or
VL-700 BASE ETH / TAIWAN – EnOcean Gateway and Edge Controller
The VL-700 BASE ETH serves as an IoT edge controller which, with the pre-installed software, is able to receive and interpret data from 500 sensors and up to 32 EnoDisc® and send it to a cloud, for example. Optionally, the data can also be evaluated locally and/or transferred to the building automation system. The usual
VL-700 BASE / FCC / UL – EnOcean Gateway and Edge Controller
The VL-700 BASE serves as an IoT edge controller which, with the pre-installed software, is able to receive and interpret data from up to 32 EnoDisc® and send it to a cloud, for example. Optionally, the data can also be evaluated locally and/or transferred to the building automation system. The usual interfaces such as BACnet,
AL-432-00-902 EnoSense® PIR Ceiling / FCC – EnOcean Motion sensor
The AL-432-00-921 EnoSense® PIR Ceiling contains a high sensitive PIR sensor that detects moving people in range. Best case, the sensor is supplied with energy by the integrated solar cell in the front. In situations where the ambient light is not sufficient, an internal battery supplies the sensor energy storage for typically 5 years or
AL-431-00-902 EnoSense® WALL+DESK / FCC – EnOcean sensor for desksharing
This small EnOcean sensor is powered by its integrated solar cell and supplies its measured values at configurable intervals. The sensor, which is snapped into a housing, is attached with a double-sided adhesive pad, preferably on the table top at a corner of the workstation. Depending on the colour of the desk, the sensor is
AL-436-00-902 EnoSense® People Counter / FCC – EnOcean People counting
This easy-to-install sensor for counting people passing by is powered by two AA batteries and transmits its data wirelessly with every counting event. The sensor is attached to the door frame above the door, preferably on the hallway side, using a double-sided adhesive pad (included). Depending on the color of the door frame, the sensor