EnOcean Easyclickpro flush-mounting receiver, 2-channel

The bidirectional Easyclick receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. The Easyclick receiver serves to switch lights and other electrical consumers. A range of functions and parameters can be selected:
• two-key operation ON/OFF (standard function)
• one-key operation ON/OFF (changeover)
• button operation (pulse)
• hotel card switch with definable follow-up time
• stairwell light with selectable running time and shutdown warning
• automatic OFF after selectable running time
• fan function with delayed ON and with selectable follow-up time
• save and retrieve 4 lighting scenes at the press of a key (one lighting scene per key)
• window handle and window contact, visualisation also parallel to the switching outputs
• movement detector and light sensor
• A function can be defined individually for each of the max 32 programmed transmitters
• Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions
• Separate preassigned functions and parameters when e.g. window contacts, window handles, and movement detectors are being programmed

Technical data:
Own consumption: < 0.5 W (bistable relays)
Transmit frequency: 868.3 MHz
Voltage supply: 100–240 Vac/ 50–60 Hz
Neutral conductor: required
Ambient temperature: -20 °C to +40 °C
Storage temperature: -40 °C to +85 °C
Plugin terminals: max 1 x 1.5 mm²
Housing height: 28 mm
Rating: IP 20
Mounting lugs: for screwing down in switch sockets
Approvals: CE; KEMA/KEUR
Load types 230 Vac (110 Vac)
Incandescent lamps 500 W (250 W)
HV halogen lamps 100 W (50 W)
Motor load 100 VA (50 VA)
EVG load 1 pcs (1 pcs)
The quantity depends on the type and manufacturer. The device’s data sheet must be observed!