TRIO2SYS – EnOcean wall switch 1 button compatible ODACE

EnOcean single switch, SCHNEIDER ODACE design

The switch transmitter is wireless and battery-free. It is completely autonomous and sends a radio signal using the energy released when the ON and OFF buttons on the transmitter switch are pressed. It requires no maintenance.

It eliminates tedious back-and-forth wiring. It can be placed anywhere in the room and changed at will. Its suitable base allows it to be fixed to a wall either with screws or double-sided adhesive tape.

Combined with a receiver, it can be used to remotely control a variety of electrical equipment.

An electrical device can be switched on with one switch and off with another. With up to 30 transmitters per receiver, the possibilities are virtually infinite, without breaking through walls and partitions. The same applies to applications in schools, hotels, hospitals, historic buildings, offices and tec.

The bezel is interchangeable, as it is compatible with SCHNEIDER ELECTRIC’s ODACE range.

ATTENTION: Product supplied without cover plate. You will find the white cover plate in the « Accessory » tab.

FUNCTIONS:

  • Cordless and battery-free
  • Maintenance-free
  • Compatible with the entire SCHNEIDER ODACE finish range.
TECHNICAL SPECIFICATIONS:
  • Transmission frequency: 868.3 MHz
  • Protocol: EnOcean
  • EnOcean Equipment Profile (EEP): F6-02-01
  • Dimensions: 8,52×8,52×1,76
  • Color: ABS White
  • Operating temperature: -25 to +45°C
  • Supported humidity range: 0% to 75% (non-condensing)

Downloads

TRIO2SYS – EnOcean wall switch 1 button compatible ODACE