Eltako Wireless window contact + glass break sensor Eimsig with battery FFGB-hg (Eimsig)
Wireless window contact + glass break sensor Eimsig with battery (lifetime several years) 135 x 26 x 9 mm, light grey. With intelligent burglary detection. Recognizes open/closed/tilted/locked and glass vibration. An alarm signal is sent when the window is opened at the locked or tilted position. Fixing by screwing in the window frame, between frame and sash on PVC or
Eltako Wireless signal generator adapter FSSG-230V
Wireless signal generator adapter FSSG-230V 10A/250V AC. 100x55x45mm (measure ments without plug), pure white glossy. Additional an internal acoustic signal generator with a volume of at least 80dB will fl ash a load connected to the plug. 230V incandescent lamps and halogen lamps 1000W, ESL and 230V LED lamps up to 200W. Standby loss only
EiMSIG Security System (3rd gen.)
The EiMSIG Security System is HomeKit certified. The particularly intuitive operating concept and the protection of the building’s outer shell have already convinced more than 10,000 customers. The Eimsig window and universal sensors are supported with the EnOcean radio standard and other Eimsig components. The system is suitable for old and new buildings. Security at
NodOn Fil Pilote Module
EnOcean Pilot Wire Heating Module is easy to install on all electric heaters with pilot wire to turn it connected and smart. It is EnOcean 3.0 certified and can be controlled with a controller, a door/window opening or motion sensor, or a compatible home automation gateway. Thanks to its 6 modes (Comfort, Comfort -1°C, Comfort
ESRPU/ EDRPU – Wireless Switch (902 MHz)
Self-powered wireless controls are simple to install. The Single and Double Rocker Pads use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.
EHSMU – HVAC Setback Module (902 MHz)
The HVAC Setback Module provides an extraordinarily simple, highly efficient means for switching HVAC systems between normal operation and a pre-configured setback mode. The module features two (2) buttons with LED indicator lights that are used to configure or manually control the device. The setback module is easy to install and connects to the HVAC
Ermine Occupancy Sensor
Near field, around 5 meters, Occupancy sensor. Battery powered, but it will last more than 10 years.