Eltako Wireless window/door contact with energy generator FTKE-rw
48 x 32 x 11.5 mm, pure white. Also for monitoring of drawers and other mobile equipment. Generates the power for wireless telegrams itself when the lever is pressed, therefore there is no battery, no connecting wire and no standby loss. Fixing by gluing, screwing or with mounting brackets BW3. A wireless telegram is sent when a window is opened
Eltako 1- and 2-level outdoor wireless repeater FARP60-230V
Outside wireless repeater 1 and 2 levels, 60 x 46 mm, 30 mm deep. Only 0.7 watt standby loss.
Eltako 1- and 2-level wireless repeater FRP70-230V
1 and 2 level wireless repeater with small antenna and with antenna FA250. Only 0.6 watt standby loss. A wireless antenna FA250 or FAG55E- is connectable as required.
Eltako Wireless level meter Probare P10
The wireless field test tool Probare P10 is a portable field tester which shows the signal quality of the received EnOcean 868MHz telegrams. Additionally it helps to determine the best place for EnOcean transmitters, receivers or repeaters, it can also help to look if any signals are sent or not.
Eltako 1- and 2-level wireless repeater FRP61-230V
1 and 2 level wireless repeaters. Only 0.7 watt standby loss.
Eltako Wireless 50-way remote control with display and rechargeable battery. With wall holder and charger FFD-al/anso
Wireless 50-way remote control with display 185 x 50 mm, 17 mm high. Power is supplied by lithium-ion battery whose voltage is monitored and shown in the display. With charger, wall holder WHF-al and 2 stainless-steel countersunk screws 2.9 x 25 mm and plugs 5 x 25 mm.
Eltako Wireless window/door contact with solar cell FTK-
Wireless window/door contact with solar cell 75 x 25 x 12 mm. Adhesive foil mounting. Protection class IP54, therefore suitable for outdoor mounting.
Eltako Wireless infrared converter with USB port FIW-USB
Wireless infrared converter with USB port for the universal remote control Logitech Harmony Touch (available from specialist retailers). Only 0.05 watt standby loss. With a special Eltako FIW data record, the infrared signals are converted into wireless telegrams by a wireless infrared converter FIW-USB and transmitted to the Eltako wireless network. Either connect to a
Eltako Wireless pushbutton 55 x 55 mm without wire F4T55B-
Wireless 4-way pushbutton for single mounting 80 x 80 x 15 mm or mounting in the 55 mm switch system. Whisper quiet and with battery (lifetime 2-5 years).
Eltako Wireless repeater pure white glossy FRP65/230V-wg
2 level wireless repeaters in the housing for single mounting 84 x 84 x 30 mm. Only 0.8 watt standby loss.