Wireless temperature room sensor RFE06 PT-S5 0-40°C Setpoint Generator / Rocker / Timer Switch

The wireless temperature room sensor RFE06 PT-S5 measures the room-temperature, position of the setpoint adjusting wheel and switch and then transmits the values to a receiver/gateway.

Wireless temperature room sensor RFE06 PT 0-40°C Setpoint Generator / Rocker

The wireless temperature room sensor RFE06 PT measures the room-temperature and the position of the setpoint adjusting wheel transmits the values to a receiver/gateway.

Seco Wireless Vibration Sensor

Ultra low power consumption, battery-less and no cables, only 1.3uA current consumption 50 Lux illuminations can work normally. Fully charged can standby more than 7 days in total dark environment Vibration monitoring can detect slope, angle, and send alarm signals Heart-rate transmission

Seco Wireless Windows Contact Sensor

The wireless self-powered sensor can be used to detect the open and closed status of doors or windows, or it can be paired with an occupancy sensor to accurately detect whenever someone enters or exit room.

Seco Occupancy Sensor

The wireless ceiling-mounted occupancy sensor can save energy and adds convenience by accurately detecting when an area is occupied or vacant. It is wireless, self-powered, and uses a passive infrared sensor to detect motion. In the meanwhile, it transmits EnOcean radio message to lighting, HVAC to use energy more efficiently.

Seco Electric Energy Meter

The device directly interfaces to your existing metering infrastructure (oil, gas, electric, heat) via either optical or wired connector. Features: Transforming your existing meters into "smart meters" Recording electricity factor and power consumption in real time Table or graphic statistic analysis Fully EnOcean compliant

Seco LED Dimmer

Control room’s illumination and derive loads up to 36-Channels, such as filament lamps, spot lamps, LED lamps etc. Connecting to occupancy sensors, window contact and illumination sensor to achieve intelligent control

Seco Wireless Switch

Features: 1 rocker or 2 rocker per switch Each rocker position can be programmed On/off or toggle control mode Turn up/down for curtains or dimming Easy to install 868Mhz,315Mhz,902Mhz(Unlicensed Frequency Band)

VA2 – VAV controller

Fully programmable VAV controller. Offers bidirectional control for wired, EnOcean wireless and ZigBee wireless end-devices. Comes with pressure sensor, actuator, embedded bidirectional BACnet IP gateway and BACnet IP server hosting a web BMS. Offers daisy-chain, wireless ZigBee mesh and IP/Ethernet networking options. Can also be integrated to a third party BACnet IP system.

GW2 – Gateway

Fully programmable gateway. Offers bidirectional control for EnOcean wireless and ZigBee wireless end-devices. Comes with embedded bidirectional BACnet IP gateway and BACnet IP server hosting a web BMS. Offers daisy-chain, wireless ZigBee mesh and IP/Ethernet networking options. Can also be integrated to a third party BACnet IP system.