Seco Wireless Switch

Features: 1 rocker or 2 rocker per switch Each rocker position can be programmed On/off or toggle control mode Turn up/down for curtains or dimming Easy to install 868Mhz,315Mhz,902Mhz(Unlicensed Frequency Band)

VA2 – VAV controller

Fully programmable VAV controller. Offers bidirectional control for wired, EnOcean wireless and ZigBee wireless end-devices. Comes with pressure sensor, actuator, embedded bidirectional BACnet IP gateway and BACnet IP server hosting a web BMS. Offers daisy-chain, wireless ZigBee mesh and IP/Ethernet networking options. Can also be integrated to a third party BACnet IP system.

GW2 – Gateway

Fully programmable gateway. Offers bidirectional control for EnOcean wireless and ZigBee wireless end-devices. Comes with embedded bidirectional BACnet IP gateway and BACnet IP server hosting a web BMS. Offers daisy-chain, wireless ZigBee mesh and IP/Ethernet networking options. Can also be integrated to a third party BACnet IP system.

UN2 – Universal controller

Fully programmable universal controller. Offers bidirectional control for wired, EnOcean wireless and ZigBee wireless end-devices. Comes with embedded bidirectional BACnet IP gateway and BACnet IP server hosting a web BMS. Offers daisy-chain, wireless ZigBee mesh and IP/Ethernet networking options. Can also be integrated to a third party BACnet IP system.

SED-3R and SED-5R Light relay receivers

The relay receiver controls lights or other loads by responding to EnOcean signals from self-powered wireless light switches and/or other compatible transmitters. The relay receiver mounts to junction box knockout holes or inside wiring cavities for maximum wireless range.

SED-WDS Window and door contact sensor

The device can be easily mounted on any standard door or window frame to enable occupancy based control of lighting, HVAC, and miscellaneous electric loads. The sensor uses radio frequency technology to communicate wirelessly with other EnOceanbased devices whenever it detects a door or window has been opened or closed. The sensor is completely self-powered

SED-CMS Ceiling mounted occupancy sensor

The ceiling mounted sensor enables a new level of energy saving control for rooms, hallways, and other common areas. The sensor uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices to scale back temperature and turn-off lights when a space is unoccupied for a set period of time. The sensor is self-powered by

SED-WMS Wall mounted occupancy sensor

The wall mounted sensor is wireless and self-powered making it one of the most cost-effective ways to control energy-use in unoccupied rooms. The device can be installed in minutes as they are wireless and do not require batteries. The device harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with

SED-KCS Key card switch

The key card switch saves energy through occupancy based control of lighting, HVAC, and miscellaneous electric loads. The switch is self-powered, and inserting or removing the card generates sufficient kinetic energy to send a wireless signal to other EnOceanbased devices within the room. Guests simply insert their key card in the slot when they enter

SED-1RS Single rocker light switch

This self-powered wireless device is simple to install and uses EnOcean energy harvesting technology to communicate wirelessly with other wireless devices to provide convenient control of lighting, temperature and miscellaneous electric loads. The device features a clean contemporary styling, making it an attractive addition sure to complement any décor.