e.g. EU, Non-EU Europe, China, Singapure, …

BootUp – Repeater

Repeater for the EnOcean radio based installations. The repeater is designed for low-level amplification of radio telegrams between EnOcean sensors and receivers. Typically, the repeater is used if the sensor location is outside the receiving range or if there are communication challenges between sender and receiver, (e.g. building of walls, moving of furniture’s / cupboards

KL6023 | Wireless adapter for EnOcean radio technology

KL6023 | Wireless adapter for EnOcean radio technology

eibPort LAN-Powernet-KNX + EnOcean Version 3

Automation and visualization gateway for your building control. eibPort device connects your building control with Ethernet and Home-Entertainment. Through the network interface, it is e.g. possible to switch a beamer or start the preferred mp3 playlist by using a pushbutton. Furthermore, the eibPort provides an excellent visualization and automation of the whole building control. The

USB-Gateway SG-USB300

The gateway SG-USB300 serves as bidirectional gateway between Omnio and computer systems with a USB interface. This gateway is equipped with the EnOcean radio module TCM 300.

DUO DMX Gateway

The device provides 2 DMX outputs with 512 channels each which are programmed independently from each other. So e. g. two rooms can be controlled differently by just using one device. Beneath linking of light scenes the separate channels can be switched and dimmed directly by KNX® group addresses or EnOcean® profiles. The EnOcean® version

eibPort LAN-EnOcean-GSM Version 3

Automation and visualization gateway for your building control. eibPort device connects your building control with Ethernet and Home-Entertainment. Through the network interface, it is e.g. possible to switch a beamer or start the preferred mp3 playlist by using a pushbutton. Furthermore, the eibPort provides an excellent visualization and automation of the whole building control. The

Bilton EnOcean Switch

The EnOcean remote switch designed by manufacturers Eltako is 80 x 80 mm and can easily be wall mounted. It is available either as a double or a 4 way switch.

Omnio Gateway 32-channels APG01-KNX

The Omnio radio gateway APG01-KNX2 serves as bidirectional gateway between Omnio and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus, for example to control KNX actuators. EnOcean wireless actuators can also be controlled via KNX. The gateway supports the encrypted wireless communication

Cubevision

Previously sophisticated visualizations were time-consuming and therefore costly. This changes with the new CubeVision of BAB TECHNOLOGIE. The “Cube” is generated automatically. Just create the building structure, link the group addresses and the rest is done by itself. The new CubeVision is part of the eibPort Version 3. www.CubeVision.info

KL6583 | EnOcean transmitter and receiver

KL6583 | EnOcean transmitter and receiver