e.g. EU, Non-EU Europe, China, Singapure, …

Omnio Room Sensor RTF161

The Omnio room sensor RTF- 161 is a battery less, maintenance-free and wireless sensor to measure temperature (0…40 °C) and humidity (0…100 %rH) indoors. The temperature can be set with its operation elements (set point). It is able to transmit temperature, humidity and set point via radio to Omnio thermostat actuators and gateways. The RTF-

Omnio flush-mounted switching actuator 1-channel UPS230/08

The Omnio flush-mounted switching actuator 1-channel UPS230/08 is a device for switching electrical loads. Its potential free output is able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled switch (AW23/24/25), window

Omnio flush-mounted switching actuator 1-channel UPS230/10

The Omnio flush-mounted switching actuator 1-channel UPS230/10 is a device for switching electrical loads. Its potential free output is able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled switch (AW23/24/25), window

Omnio DIN rail mounted switching actuator 4-channels REGS12/04

The Omnio DIN rail mounted switching actuator 4-channels REGS12/04M is a device for switching electrical loads. Its four potential free outputs are able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled

Omnio DIN rail mounted switching actuator 8-channels REGS12/08

The Omnio DIN rail mounted switching actuator 8-channels REGS12/08M is a device for switching electrical loads. Its eight potential free outputs are able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled

Universal Radio Transmitter FTM

Application Monitoring of the switching states of voltage-free contacts. In addition, transmission of ambient temperature. Description The universal wireless transmitter can integrate any device with a voltage-free contact into a building automation system. Examples comprise the alarm relays of heating systems or status messages of alarm systems. The voltage-free contact is supplied with voltage by

Temperature Sensor FTM T

Application Determination of the ambient temperature and air humidity at a defined location. Description The temperature sensor FTM T transmits the current ambient temperature via the integrated EnOcean® wireless module to the AFRISOhome gateway. The temperature and humidity sensor FTM TF also transmits the value of the current air humidity. Based on the event message,

Omnio wall mounted transmitter 4-channels WS-102

The Omnio wall mounted transmitter 4-channels WS-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line. To install with screws or adhesive foil. Optional mounting plates allow mounting in different combinations.

Temperature and Humidity Sensor FTM TF

The temperature and humidity sensor FTM TF cyclically measures the ambient temperature as well as the air humidity and sends a wireless EnOcean message. Mounting by means of simply placing, gluing, screwing or fixing with cable ties. An integrated photovoltaic cell supplies the required power. An optional battery can be used for application in darker

Omnio Key-Card-Switch 1-channel KSM

The Omnio key card switch 1-channel KSM is a self-powered and maintenance-free radio transmitter. It can be used as a main switch for lighting, heating and blinds in hotel-, school- and conference rooms as well as in offices. To fix with screws or adhesive pad.