e.g. EU, Non-EU Europe, China, Singapure, …

EnOcean Easyclickpro flush-mounting receiver for blinds/shutters, with mounting plate, with position detection

In addition to the bidirectional functions, the Easyclick receiver variant features position detection that can record and acknowledge the running times of shutters and blinds. Positions can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. The running times of the receivers are synchronised automatically when they reach their UP/DOWN end positions.

EnOcean Easyclick thermostat receiver, flush mounting

Easyclick thermostat receiver for flush mounting, living space function for regulating heating temperature ON/ OFF: The receiver compares the room temperature transmitted by the room temperature sensor with the entered setpoint. A smaller value switches the relay ON, a higher value OFF (thermostat function). The relay output can be used directly to actuate 230 Vac

EnOcean Easyclickpro plug through adapter SCHUKO, 1-channel, with energy metering

Easyclickpro plug through switch, bidirectional, 1-channel with energy meter (SCHUKO®) The bidirectional Easyclick plug through receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. An integrated energy meter (energy measuring

EnOcean Easyclickpro aerial module for DIN-rail system

The bidirectional Easyclick aerial module receives all signals from Easyclick transmitters and repeaters inside its range. These are then rerouted via an RS485 interface to the Easyclick DIN-rail modules. The Easyclick modules are linked to each other with modular plug-in cables. Up to 128 modules can be connected to the RS485 bus. If required, also more

EnOcean Wireless CO2, Temperature and Humidity Sensor

Measure the indoor air quality in each room or zone Our wireless multi-sensors measure and monitor the carbon dioxide (CO2) levels, ambient temperature and relative humidity in a room or zone. The small wireless CO2 sensors simply stick onto the wall and are solar-powered using ambient room light, making them easy to install and very low maintenance.

EnOcean Easyclickpro wall mounted Occupancy sensor

The wireless Easyclick wall-mounted occupancy sensor is supplied with energy from solar cells and detects movements via a passive infrared sensor. The occupancy sensor is easy to install and saves energy. For instance, lighting switches ON automatically when a person enters a room, and automatically OFF after a follow-up time when he leaves again. In this

EnOcean Easyclickpro flush-mounting receiver, 2-channel

The bidirectional Easyclick receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. The Easyclick receiver serves to switch lights and other electrical consumers. A range of functions and parameters can

EnOcean Easyclickpro flush-mounting receiver, 2-channel, with energy metering

The bidirectional Easyclick receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. The Easyclick receiver serves to switch lights and other electrical consumers. In addition to the bidirectional functions, the Easyclick

EnOcean Easyclickpro flush-mounting receiver for blinds/shutters

The bidirectional Easyclick roller/shutter receiver can not only receive radio signals, but also transmits back its status every time it changes. For instance, the top/bottom end position of a shutter/blind can be depicted as a virtual image and visualised e.g. on the handheld transmitter D 450 FU-HS 128. The Easyclick receiver is designed to regulate

EnOcean Easyclickpro flush-mounting receiver for blinds/shutters, with position detection

In addition to the bidirectional functions, the Easyclick receiver variant features position detection that can record and acknowledge the running times of shutters and blinds. Positions can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. The running times of the receivers are synchronised automatically when they reach their UP/DOWN end positions. The