e.g. EU, Non-EU Europe, China, Singapure, …

EasySens® JOY SR Fancoil

The design-oriented JOY SR Fan coil with its EasySens® radio interface is used for individual temperature control and activation of fan coil units in hotels, offices and living rooms. The JOY is designed for 2- or 4-pipe systems and offers change-over functionality. Two configurable inputs can be used to account for room occupancy and energy

EnOcean Wireless Three Channel CT Clamp

Measure energy consumption at a circuit, zone or machine level, in real time Pressac’s wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds. The small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply

EnOcean Wireless Single Channel CT Clamp

Measure energy consumption at a circuit, zone or machine level, in real time Pressac’s wireless current sensors (CT) measure the alternating current (AC) and report the average of 5 measurements every 30 seconds. The small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They simply

EMDCA – Motion Detector with Illumination Sensor (868 MHz)

EMDC(A) Easyfit motion detection with illumination sensor is a self-powered device that monitors the environment for person movement using a passive infrared (PIR) sensor and measures the light level via a dedicated illumination sensor. Detected movement and the measured illumination level are communicated wirelessly using EnOcean advertising telegrams according to the EnOcean sensor specification. EMDC

USB 300 – USB Gateway (868 MHz, Single Packaging Version)

USB 300 is a USB stick gateway which connects PC’s, consumer devices & Wifi APs to the world of EnOcean radio products. The new version (stepcode DC and later) comes with an optimized PCB antenna for better range. For details see: https://www.enocean.com/en/products/enocean_modules/usb-300/

EnOcean Wireless Pulse Counter

Monitor the pulse count from a meter or pulse output Pressac’s wireless pulse counters are designed to count the number of pulses from electricity, water, or general meters, as well as machinery and equipment with a pulse output. Connects to equipment with a pulse output Monitors the pulse output from meters, machinery and equipment. Supports

AGFEO En-Modul 42 – EnOcean without range problems and with all the possibilities of modern communication channels as a supplement to KNX, HomeMatic, MQTT (IoT) and network (TCP/IP http requests).

SmartHome on a new comfort level The AGFEO En-Modul 42 offers the possibility to operate and use EnOcean radio telegrams also via the communication channels of an AGFEO telephone system. For this purpose, the module is plugged into a free module slot of a suitable AGFEO system telephone. The SmartHome server integrated in the AGFEO

Eltako Wireless window contact in the rebate open/closed with battery eTronic

Wireless window contact in the rebate open/closed with battery (lifetime 6-8 years) 77 x 24 x 10 mm, black. eTronic is a battery operated (CR 2032) wireless switching contact that is concealed in the window. A pin on the lower corner drive, which is attached to the moving bolt of the fitting, triggers the contact of the eTronic. Fixing by

Eltako Wireless window multisensor in the rebate with battery mTronic

Wireless window multisensor in the rebate with battery ­(lifetime several years) 135 x 18 x 9 mm, light grey. With intelligent burglary detection in mode 1 and 2 (locking monitoring). An alarm signal is sent when the window is opened at the locked and tilted position. Fixing by screwing in the window frame, between frame and sash on PVC or

Eltako Wireless outdoor socket switch actuator FASSA-230V

1 NO contact not potential free 16 A/250 V AC, 230 V LED lamps and ESL up to 400 W, incandescent lamps 2300 Watt. 116x56x46 mm (measure­ments without plug), black. Suitable for both indoors and outdoors, IP44 (splash-proof). Encrypted wireless, bidirectional wireless and repeater function are ­switchable. Only 0.4 watt standby loss.