AL-512-00-902 EnoDisc® / FCC, EnOcean radio receiver and transmitter

The EnoDisc® is an EnOcean transceiver for smart spaces that communicates via Ethernet and is powered via PoE (Power Over Ethernet).
The three-part housing consisting of base, lower part with RJ45 or LSA connection and cover with the electronics allows easy installation.
As soon as a connection has been established via port 8424, the EnoDisc® supplies sensor data in the standardized data format ESP3 (EnOcean Serial Protocol 3).

The EnoDisc® has the following main properties:

  • Power supply voltage: Power Over Ethernet PoE / 48 V DC
  • 1x Ethernet (10/100 MBit) an RJ45 socket or an LSA interface block
  • 1x EnOcean transceiver 868.3 MHz, bidirectional
  • Uses the  EnOcean Serial Protocol 3 (ESP3) to receice and transmit data from/to the Ethernet.

The built in webserver provides the following functions:

  • EnOcean monitor, to see any received EnOcean telegramm
  • IP configuration (DHCP / Fixed)
  • Device setup
  • IP status

The combination of communication and power supply by PoE makes this device quite flexible and easy to use. Only one cable, no line voltage is needed.
The EnoDisc® comes in an on-wall housing with a modern design, and can be easily mounted to the ceiling. The electrical connection is done using a standard Ethernet patch cable to connect to a keystone or with an LSA tool for Ethernet installation cables.

Available options/frequencies:

  • CE, FCC, COLOMBIA, NCC, KC, ARIB, CCC, IMDA

Downloads