Level switche Minimelder/Maximelder
Application Designed to signal minimum or maximum levels of water, heating oil EL, L, M, oil/water mixtures and neutral, non-viscous and non-adhesive liquids in tanks. System owners are alerted when the supply runs low or if there is a hazard of overfilling. Description Minimelder/Maximelder consist of a control unit and a height-adjustable float probe. The
Indoor siren AIS 10
Application The AFRISO AIS 10 indoor siren frightens off trespassers and alerts residents with a loud alarm tone of 85 dB as soon as one of the connected EnOcean devices sends an alarm signal. Description The indoor siren features a plastic housing for connection to a standard CEE socket and warns persons in the
Wireless smoke alarm ASD 10
For detection of fumes and smoke gas in living spaces. Audible alarm when a defined smoke concentration is exceeded.
Micropelt iTRV – self-powered radiator valve actuator (MVA-004)
NodOn Indoor Temperature & Humidity sensor
Measure and control the temperature and the humidity from a wireless and battery-less sensor Compatible with the EnOcean® worldwide Smart Home & Smart Building protocol, this EnOcean® Temperature & Humidity Sensor will check the temperature and the humidity of the room every 100sec, and will feedback it to your Home Automation Gateway or supervision system
Gateway KNX ENO 636 secure
The KNX ENO 636 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus, for example to control KNX actuators. EnOcean wireless actuators can also be controlled via KNX. The KNX ENO
Gateway KNX ENO 634
The unit KNX ENO 634 serves as a bidirectional gateway between EnOcean radio devices and the KNX/EIB bus. With this device, commands and measured values of EnOcean wireless sensors can be transferred to the KNX bus, for example, to control KNX actuators. Also EnOcean wireless actuators can be controlled via KNX. For EnOcean sensors the
Gateway KNX ENO 632
The unit KNX ENO 632 serves as a bidirectional gateway between EnOcean radio devices and the KNX bus. With this device, commands and measured values of EnOcean wireless sensors can be transferred to the KNX bus, for example, to control KNX actuators. Also EnOcean wireless actuators can be controlled via KNX. For EnOcean sensors the
Gateway KNX ENO 630
The unit KNX ENO 630 serves as a unidirectional gateway between EnOcean radio devices and the KNX/EIB bus. With this device, commands and measured values of EnOcean wireless sensors can be transferred to the KNX bus, for example, to control KNX actuators.For EnOcean sensors the device is based on the so-called EnOcean Equipment Profiles (EEP).
STM 32xJ – Wireless Sensor Module
The extremely power saving RF transmitter module STM 32x/ STM 429J of EnOcean enables the realization of wireless magnet contact sensor. Powered by a solar cell it works absolutely maintenance-free. Technical information and more detailed infromation on: STM 320 (868 MHz for Europe) STM 329 (868 MHz for Europe) STM 320U (902 MHz for North