1 or 2 Channel Switch
The light switch is a battery-free wireless transmitter that communicates with a wide variety of receivers. Multiple color / finish options available.
Wireless Access Point
Wireless LAN Access Point with ETHERNET interface for use with EnOcean 868 MHz or 902 MHz wireless devices and the MES Venergy UI software.
2 Channel Lighting Relay (UTR-L3)
The M9-UTR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occ sensor.
Smart Repeater
M9-USR-RPT Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the sensor and receiver which diminishes the signal.
0-10V Lighting Control Module (metering & temp)(LM)
The M9-USR-LM offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occupancy sensor.
1 Channel Lighting Relay (USR-L3)
The M9-USR-L3 Lighting Control Module responds to a variety of wireless EnOcean devices to control and dim LED drivers, fluorescent ballasts, or other switchable loads. The Mx-USR-L3 offers bi-directional, ON/OFF and 0-10V dimming control when combined with a wireless light switch or automatic shut-off when combined with a wireless occupancy sensor. Additionally, the Lighting Control
Magnum USB Stick
M9-USB The Magnum USB stick enabled with a radio module for over-the-air configuration or a Magnum eBox (Mx-EBOX) for configuration over Ethernet / WIFI.
PWM LED Dimming Module
M9-OPUS-PWMLV The Magnum Energy Solution’s PWM LED Dimming Control Module, through the use of thousands of PWM dimming steps, creates what is perceived by the natural eye as a single continuous dim, even at extremely low light levels.
In-Fixture Lighting Node (10V12)
The Mx-OPUS-10V12 is compatible with 0-10V, dim-to-off LED drivers. The device is powered through available low voltage from the driver or an available 12-15VDC source.
Window / Door Sensor
M9-EDWS The Magnum Door / Window Sensor helps provide energy savings for an area by detecting when a door or window opens or closes. It is a wireless solar-powered sensor that can be used on its own to detect the open and closed status of entry doors or windows, or it can be paired with