Eltako Wireless mini pushbutton without battery or wire, with double rocker FMT55/4-

Wireless mini pushbutton, 55 x 55 mm external dimensions, 15 mm high, with double rocker. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless 2-way mini pushbutton without battery or wire, with rocker FMT55/2-

Wireless mini pushbutton, 55 x 55 mm external dimensions, 15 mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless pushbutton 55 x 55 mm without battery and wire FT55-

Wireless 4-way pushbutton, 80 x 80 mm external dimensions, internal frame dimensions 55 x 55 mm, 15 mm high. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless repeater pure white glossy FRP65/230V-wg

2 level wireless repeaters in the housing for single mounting 84 x 84 x 30 mm. Only 0.8 watt standby loss.

Eltako Key card switch in E-Design65 FKF65-wg

Wireless card switch for surface mounting 84 x 84 x 29 mm. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss.

Eltako Wireless pull switch in E-Design65 FZS65-wg

Wireless pull switch for surface mounting 84 x 84 x 24 mm. With silver and red handle. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. When the handle is pulled and released, a wireless telegram is sent to the Eltako ­wireless network. The scope of supply

Eltako Wireless motion/brightness sensor in E-Design65 FBH65S/12V DC-wg

Wireless motion/brightness sensor pure white glossy for surface mounting 84 x 84 x 39 mm or mounting into the E-Design65 switching system. Power supply with the integrated solar cell or a 12 V DC power supply unit. Only 1 mW standby loss.

Eltako Wireless motion/brightness sensor in E-Design65 FBH65/12V DC-wg

Wireless motion/brightness sensor pure white glossy for surface mounting 84 x 84 x 39 mm or mounting into the E-Design65 switching system. Power supply with a 12 V DC power supply unit. Only 1 mW standby loss.

Eltako Wireles transmitter module with batteries and ­antenna rod. L x W x H: 60 x 46 x 30 mm (dimensions excluding antenna and fixing screws) FSM60B

This wireless transmitter module can be operated by a water sensor FWS60 or a pushbutton and transmits a variety of adjustable wireless telegrams to the Eltako building wireless system. An internal jumper permits selection between 4 operating modes.

Eltako Impulse switch with integr. relay function pure white FSR70S-230V-rw

1 NO contact not potential free 10 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps up to 2000 watts, energy saving lamps ESL up to 200 W. Only 0.8 watt standby loss.