Eltako Wireless actuator Impulse switch with integr. relay ­function FSR61LN-230V

2 NO contacts for bipolar switching of L and N 10 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps up to 2000 watts, off delay with switch-off early warning and switchable pushbutton permanent light. Encrypted wireless, bidirectional wireless and ­repeater function are switchable. Only 0.8 watt standby loss.

Eltako Wireless actuator light controllerFLC61NP-230V

1 NO contact not potential free 10 A/250 V AC, 230 V LED lamps up to 400 W, incandescent lamps 2000 watts, 5 selectable operating modes. Encrypted wireless, bidirectional wireless and ­repeater function are switchable. Only 0.8 watt standby loss.

Eltako RS485 bus actuator 4-channel heating/cooling relay F4HK14

Heating/cooling relay with 4 channels, 1 NO contact per channel 4 A/250 V AC, potential free from the power supply, with DX technology. Bidirectional. Only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus wireless three-phase energy meter DSZ14WDRS-3x5A with settable CT ratio with display, MID approval

RS485 bus wireless three-phase energy meter with settable CT ratio and MID. Maximum current 3×5 A. Standby loss 0.8 W at L1 and only 0.5 W at L2 and L3 each. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus 1 and 2 level wireless repeater FRP14

1 and 2 level wireless repeater with small antenna. Only 0.6 watt standby loss. If required, a wireless antenna FA250 can be connected. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus multifunction sensor relay FMSR14

Multifunction sensor relay with display and 5 channels (brightness, twilight, wind, rain and frost) for the Eltako RS485 bus. Only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus wireless three-phase energy meter DSZ14DRS-3x80A MID with display, MID approval

RS485 bus wireless three-phase energy meter. Maximum current 3 x 80 A. Standby loss 0.8 W at L1 and only 0.5 W at L2 and L3 each. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus display timer FSU14

Display timer with 8 channels for the Eltako RS485 bus. With “astro” function. Only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus actuator single room control, heating/ cooling for 2 zones with PCB relay FAE14LPR

2-channel single room control, 4 A/250 V, potential free. Bidirectional. Only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.

Eltako RS485 bus actuator single room control, heating/ cooling for 2 zones with solid state relay FAE14SSR

Noiseless 2-channel single room control, 400 W. 2 solid state relays not potential free. Bidirectional. Only 0.1 watt standby loss. Operation only possible with the wireless antenna module FAM14.