eibPort LAN-KNX-EnOcean Version 3

Automation and visualization gateway for your building control. eibPort device connects your building control with Ethernet and Home-Entertainment. Through the network interface, it is e.g. possible to switch a beamer or start the preferred mp3 playlist by using a pushbutton. Furthermore, the eibPort provides an excellent visualization and automation of the whole building control. The

eibPort LAN-EnOcean Version 3

Automation and visualization gateway for your building control. eibPort device connects your building control with Ethernet and Home-Entertainment. Through the network interface, it is e.g. possible to switch a beamer or start the preferred mp3 playlist by using a pushbutton. Furthermore, the eibPort provides an excellent visualization and automation of the whole building control. The

DUO DMX Gateway

The device provides 2 DMX outputs with 512 channels each which are programmed independently from each other. So e. g. two rooms can be controlled differently by just using one device. Beneath linking of light scenes the separate channels can be switched and dimmed directly by KNX® group addresses or EnOcean® profiles. The EnOcean® version

Omnio Gateway 32-channels APG01-KNX

The Omnio radio gateway APG01-KNX2 serves as bidirectional gateway between Omnio and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus, for example to control KNX actuators. EnOcean wireless actuators can also be controlled via KNX. The gateway supports the encrypted wireless communication

KL6581 | EnOcean master terminal

KL6581 | EnOcean master terminal

USB-Gateway SG-USB300

The gateway SG-USB300 serves as bidirectional gateway between Omnio and computer systems with a USB interface. This gateway is equipped with the EnOcean radio module TCM 300.

KL6583 | EnOcean transmitter and receiver

KL6583 | EnOcean transmitter and receiver

Omnio Gateway APG03B-RS485

The Omnio gateway APG03B-RS485 serves as bidirectional gateway between Omnio and computer systems with RS485 interface. It receives and transmits all valid EnOcean radio telegrams. The used protocol is completely open, which easily allows the integration in personal systems. Configuration is carried out via ARCO technology (AWAG Remote Commissioning) with the E-Tool Freeware. Suitable for

KL6023 | Wireless adapter for EnOcean radio technology

KL6023 | Wireless adapter for EnOcean radio technology

Omnio flush mounted push-button interface 2-channels TST230/10

The Omnio flush mounted push-button interface 2-channels TST230/10 is a binary input device to integrate wired push-buttons, switches and sensors into the Omnio radio system. Two potential free closing contacts may be connected to its inputs. Depending on the chosen evaluation (rocker-switch, push-button, time switch or weather station) the push-button interface transmits, repeats and additionally