Eltako Wireless tubular motor, torque 10 Nm, speed 14/min, whisper mode 5/min FRM60M10

Wireless tubular motors 230 V/115 W for steel shafts SW60, torque 10 Nm, speed 14/min, with adapter set, bearing and whisper mode. The wireless tubular motors have a total length of 466 mm. The motors are fitted with blind protection and a noiseless soft brake.

Eltako Wireless tubular motor, torque 20 Nm, speed 14/min, whisper mode 5/min FRM60M20

Wireless tubular motors 230 V/115 W for steel shafts SW60, torque 20 Nm, speed 14/min, with adapter set, bearing and whisper mode. The wireless tubular motors have a total length of 526 mm. The motors are fitted with blind protection and a noiseless soft brake.

Eltako Wireless multi sensor in E-Design55 FMS55ESB-

Wireless multi sensor for single mounting 80 x 80 x 14 mm or mounting into the E-Design55 switching system. With integrated solar cell and battery CR 1632 (not included in the scope of supply).

eHandle AutoLock

eHandle AutoLock for windows – convenient and burglary-resistant The eHandle AutoLock for windows locks automatically as soon as it is turned to the closed position. The requirements for unlocking are configured in a smart home control unit. The advantages • Permanently locked window handles in the closed state • Burglary-resistance as recommended by the police

STM 550 – Multisensor Module (868 MHz)

STM 550 enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

EOSDA – Occupancy Sensor Sub Desk

The Sub-desk mounted Occupancy Sensor is detecting when a desk is occupied or vacant based on motion in the space underneath the desk. This device is wireless, and uses a passive infrared (PIR) sensor to detect such motion. The occupancy sensor transmits RF signals to control desk power supply or sends people counting information to

EPACA – EnOcean People Activity Counter (868 MHz)

The ceiling mounted sensor is detecting people motion activity in the sensing range underneath the sensor. The device is wireless and solar-powered, so no batteries are needed under typical light conditions and easiest to mount also in retrofitting.

EOSWA – Wall Mounted Occupancy Sensor (868 MHz)

Wall-Mounted Occupancy Sensor is wireless and self-powered making them one of the most costeffective ways to control energy-use in unoccupied rooms. The sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, setting back temperature and turning off lights and electrical loads when it detects that

EMSIA – IoT Multisensor (868 MHz)

The EnOcean multisensor enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

ETHSA – Temperature & Humidity Sensor (868 MHz)

ETHSx is a wireless temperature & humidity sensor for EnOcean systems. Powered by a solar cell, it works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted. The small housing can easily be mounted to verti-cal walls or furniture using