SW24-001-RFH9

Wireless Operator Keypad – Two Positions Operating frequency 902MHz for US market UP – DOWN arrow buttons Body in thermoplastic material

SW21-003-RFH9

Wireless Operator Keypad – Two Positions Operating frequency 902MHz for US market START – STOP buttons Chromed zama body 

SW21-002-RFH9

Wireless Operator Keypad – Two Positions Operating frequency 902MHz for US market ON – OFF buttons Chromed zama body

SW14-010-RFH9

Wireless Operator Keypad – One Position Operating frequency 902MHz for US market Black protruding button Body in thermoplastic material

SW11-012-RFH9

Wireless Operator Keypad – One Position Blue button ø 40mm Chromed zama body

VL-700 BASE / FCC / UL – EnOcean Gateway and Edge Controller

The VL-700 BASE serves as an IoT edge controller which, with the pre-installed software, is able to receive and interpret data from up to 32 EnoDisc® and send it to a cloud, for example. Optionally, the data can also be evaluated locally and/or transferred to the building automation system. The usual interfaces such as BACnet,

AL-432-00-902 EnoSense® PIR Ceiling / FCC – EnOcean Motion sensor

The AL-432-00-921 EnoSense® PIR Ceiling contains a high sensitive PIR sensor that detects moving people in range. Best case, the sensor is supplied with energy by the integrated solar cell in the front. In situations where the ambient light is not sufficient, an internal battery supplies the sensor energy storage for typically 5 years or

AL-431-00-902 EnoSense® WALL+DESK / FCC – EnOcean sensor for desksharing

This small EnOcean sensor is powered by its integrated solar cell and supplies its measured values at configurable intervals. The sensor, which is snapped into a housing, is attached with a double-sided adhesive pad, preferably on the table top at a corner of the workstation. Depending on the colour of the desk, the sensor is

AL-436-00-902 EnoSense® People Counter / FCC – EnOcean People counting

This easy-to-install sensor for counting people passing by is powered by two AA batteries and transmits its data wirelessly with every counting event. The sensor is attached to the door frame above the door, preferably on the hallway side, using a double-sided adhesive pad (included). Depending on the color of the door frame, the sensor

AL-512-00-902 EnoDisc® / FCC, EnOcean radio receiver and transmitter

The EnoDisc® is an EnOcean transceiver for smart spaces that communicates via Ethernet and is powered via PoE (Power Over Ethernet). The three-part housing consisting of base, lower part with RJ45 or LSA connection and cover with the electronics allows easy installation. As soon as a connection has been established via port 8424, the EnoDisc®