Gateway KNX ENO 632

The unit KNX ENO 632 serves as a bidirectional gateway between EnOcean radio devices and the KNX bus. With this device, commands and measured values of EnOcean wireless sensors can be transferred to the KNX bus, for example, to control KNX actuators. Also EnOcean wireless actuators can be controlled via KNX. For EnOcean sensors the device is based on the EnOcean Equipment Profiles (EEP). The implemented profiles mostly are specified in the data sheets of the sensors. For the control of EnOcean actuators corresponding EEPs are emulated.

This means, the gateway sends radio telegrams such as a push button or a window contact. In addition the gateway supports logical and control functions and has a radio repeater included.

The KNX ENO 632 is organized in 24 channels. Each channel can be assigned to one of the following functions:

Link from EnOcean sensor to KNX:

  • Switching and contact functions
    • Switching
    • Dimming
    • Shutter up/down
    • Scene
  • Window contacts
  • Window handles
  • Key cards switches
  • Pressure switches
  • Temperature sensors
  • Humidity sensors
  • Light sensors
  • Presence sensors
  • Gas sensors
  • Room control devices
  • Automated counter devices
  • Environmental sensors (weather station)
  • Digital inputs

Link from KNX to EnOcean actuator:

  • Switching
  • Dimming
  • Shutter

Control / logic:

  • Timer
    • Delay
    • Tracking circuit
  • Control
    • Lighting control
  • Logical functions
    • Gates (e.g. AND, OR, XOR)
    • Toggle

Other

  • Trigger
  • Encoder
  • Watchdog

The configuration of the device and the channels is done using the ETS software via the KNX bus. For the teach-in of the wireless components the keys and the display in the device are used.

Downloads

Gateway KNX ENO 632