HSM 100

The humidity sensor module HSM 100 extends the functionality of STM 43xJ temperature sensor modules. HSM 100 contains an internal calibrated humidity sensor. It can be plugged onto STM 43xJ modules via a 20 pin connector. The sensor signal is read via the ADIO3 input of STM 43xJ. In order to be able to read

STM 550J Multisensor Module

STM 550 Multisensor Module with NFC interface STM 550J enables the realization of energy harvesting wireless sensors communicating based on the EnOcean radio standard. Key applications are wall-mounted or equipment-mounted sensor applications for the measurement of temperature, humidity, illumination or acceleration / orientation.

STM 431J

Energy harvesting wireless temperature sensor module – including solar cell and helical antenna The extremely power saving RF transmitter module STM 431J of EnOcean is optimized for realization of wireless and maintenance free temperature sensors, or room operating panels including set point dial and occupancy button with a minimum number of external components. The module

STM 429J

Energy harvesting magnet contact transmitter module The extremely power saving RF transmitter module STM 429J from EnOcean enables the realization of wireless magnet contact sensors. Powered by a solar cell it works absolutely maintenance-free.

PTM 215J

Push button multi-channel switch module The PTM 215J is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of very slim on-wall mountable rocker switches or remote controls. The actuating force is typically 9 N only over a travel of 1.8 mm. Optionally, one or two switch

EnOcean DALI-2 MC Application

Wireless EnOcean receiver Up to 4 functions Suitable for standalone solutions Can be placed in installation boxes EnOcean DALI-2 MC is a wireless EnOcean receiver that can be installed on the DALI bus. The module is powered directly from the DALI bus. The receiver can handle up to 4 EnOcean telegrams, which means you can

SD-ENO-CO2

Wireless EnOcean Co2 sensor Also has integrated humidity and temperature meter Powered by solar cells and is therefore maintenance-free Wireless Co2 sensor based on EnOcean technology. The sensor is powered by a solar cell, and is therefore maintenance-free. It is wireless, and can therefore be easily placed optimally. The sensor has integrated Co2, humidity, and

EnOcean DALI-2 MC BMS integration

Wireless EnOcean receiver Up to 4 functions Suitable for BMS integration Can be placed in installation boxes EnOcean DALI-2 MC is a wireless EnOcean receiver that can be installed on the DALI bus. The module is powered directly from the DALI bus. The receiver can handle up to 4 EnOcean telegrams, which means you can

EnOcean relay with 10A/250Vac contact set

The relay can be used for both ON/OFF and Impulse control. Can be loaded with 10A/250Vac Up to 32 presses can be learned Suitable for installation in cans The relay is based on the EnOcean 868MHz standard. The contact set can be loaded with up to 10A/250Vac. The relay can be used for both ON/OFF

Wireless EnOcean PIR ø6m with Lux and Timer

Wireless EnOcean PIR Integrated Lux ​​Sensor and Timer Covers ø6m at a ceiling height of 2.3m The range is typically 30m. Wireless PIR based on EnOcean technology. The sensor covers ø6m at a ceiling height of 2.3m. The sensor has an integrated lux sensor and timer, so the light only turns on when needed, and