EnOcean Easyclickpro plug through adapter SCHUKO, 1-channel, with energy metering

Easyclickpro plug through switch, bidirectional, 1-channel with energy meter (SCHUKO®) The bidirectional Easyclick plug through receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. An integrated energy meter (energy measuring chip) also records the energy values of the connected consumer. The momentary power consumption, the operating hours, and the overall electricity consumption can be visualised e.g. on the handheld transmitter D 450 FU-HS 128. In addition, the energy consumption can be depicted as a histogram on an hourly or weekly basis, together with the total consumption and the total costs. The Easyclick receiver serves to switch lights and other electrical consumers.
A range of functions and parameters can be selected: • two-key operation ON/OFF (standard function) • one-key operation ON/OFF (changeover) • button operation (pulse) • hotel card switch with definable follow-up time • stairwell light with selectable running time and shutdown warning • automatic OFF after selectable running time • fan function with delayed ON and with selectable follow-up time • save and retrieve 4 lighting scenes at the press of a key (one lighting scene per key) • window handle and window contact, visualisation also parallel to the switching outputs • movement detector and light sensor • A function can be defined individually for each of the max 32 programmed transmitters • With manual ON/OFF key • Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions • Separate preassigned functions and parameters when e.g. window contacts, window handles, and movement detectors are being programmed

Technical data:
Own consumption standby: < 0.5 W (bistable relay)
Transmit frequency: 868.3 MHz
Voltage supply: 100–240 Vac/ 50–60 Hz
Neutral conductor: required
Ambient temperature: -20 °C to +40 °C
Storage temperature: -40 °C to +85 °C
Housing measurements: 136 x 65 x 39 mm
Rating: IP 20
Approvals: CE; KEMA/KEUR
Load types 230 Vac (110 Vac)
Incandescent lamps 2500 W (1250 W)
HV halogen lamps 1200 W (600 W)
Motor load 600 VA (300 VA)
EVG load 3 pcs (3 pcs)
The quantity depends on the type and manufacturer. The device’s data sheet must be observed!