ALADIN wireless pushbutton / 1-fold / 2-fold / all colors

Works without wiring and without battery by pressing the rocker and is completely maintenance-free. The wireless pushbutton sends via 868MHz an EnOcean protocol. Example Product: ALADIN wireless pushbutton / 1-fold / white / unprinted

ALADIN LED dimming receiver 1 channel / with extension / 230V / UP / 300651

For dimming and switching LEDs (230V) ALADIN dimming receiver for LED lights (230V). For dimming and switching of dimmable 230V LEDs, halogen and incandescent lamps. Control via ALADIN radio transmitter, or via extension unit (for wired pushbuttons), phase cut-off dimmer for loads “LED/R/C”, soft start to protect the luminaires, bidirectional with status info, various setting

ALADIN blind receiver / STAK-STAS Hirschmann, 230V / 300635

For blinds, shutters, awnings / 1 motor Blind radio receiver with connection STAK3 / STAS3 for controlling blinds, shutters and awnings and other electrical consumers (1 motor). The installation can be done in a simple way in the shutter box (note possible radio shielding by metal). The radio receiver can be individually controlled by various

ALADIN EnO receiver, 2-channel / 24V / 300671

For small voltage systems, lighting etc. 2-channel radio receiver (24V) for switching extra-low voltage equipment, lighting and other electrical consumers. Each channel can be individually controlled with div. ALADIN transmitters and assigned with different functions and parameters (up to 90 different settings). Several transmitters with different functions can be stored on the same channel. The

ALADIN EnO receiver, 2-channel / 12V / 300767

For light / ventilation and general controls 2-channel radio receiver (12V) for switching low voltage equipment, lighting and other electrical consumers. Each channel can be individually controlled with div. ALADIN transmitters and assigned with different functions and parameters (up to 90 different settings). Several transmitters with different functions can be stored on the same channel.

ALADIN EnO heating recipient, 1-channel / potential-free / 230V / 300683

For heaters and cooling 1-channel radio receiver (potential-free) for controlling heating and cooling systems and other electrical consumers. The receiver can be controlled via an ALADIN radio thermostat or multisensors and assigned different functions and parameters (up to 30 different settings). For a quick system test, control via radio pushbuttons is also possible. The teach-in

Wireless Switch

LD-AS is a wireless switch with relays that uses EnOcean wireless communication. The switch can be installed in a concealed box, connected to zero-fire wire, and comes in three models with 1, 2, and 3 relays. The switch can be paired with an EnOcean wireless passive switch, and control can also be achieved through the

ALADIN EnO DALI control, broadcast / 300505

For DALI controls for lighting The ALADIN EnO DALI Controller (DALI Master) switches and dims lighting via DALI bus with commands from ALADIN transmitter. The controller is controlled via ALADIN wireless pushbuttons, motion detectors, door contacts, etc. (all work without wiring and without battery). Up to 18 DALI operating devices (slaves) can thus be controlled

ALADIN EnO blinds receiver / 230V / 300631

For controlling blinds, shutters, awnings Blinds radio receiver for controlling blinds, shutters, awnings and other electrical consumers (1 motor). The receiver can be individually controlled with div. ALADIN transmitters and assigned with different functions and parameters (up to 45 different settings). Several transmitters (also with different functions) can be assigned to the receiver. The teach-in

ALADIN EnO receiver, 1-channel / potential-free / 230V / 300613

For light / ventilation and general controls 1-channel radio receiver (potential-free) for switching lighting and other electrical consumers. The receiver can be individually controlled with various ALADIN transmitters and assigned different functions and parameters (up to 90 different settings). Several transmitters with different functions can be stored on the same channel. The teach-in is done