NodOn Fil Pilote Module

EnOcean Pilot Wire Heating Module is easy to install on all electric heaters with pilot wire to turn it connected and smart. It is EnOcean 3.0 certified and can be controlled with a controller, a door/window opening or motion sensor, or a compatible home automation gateway. Thanks to its 6 modes (Comfort, Comfort -1°C, Comfort

AL-512-00-868 EnoDisc® / CE, EnOcean radio receiver and transmitter

The EnoDisc® is an EnOcean transceiver for smart spaces that communicates via Ethernet and is powered via PoE (Power Over Ethernet). The three-part housing consisting of base, lower part with RJ45 or LSA connection and cover with the electronics allows easy installation. As soon as a connection has been established via port 8424, the EnoDisc®

KNX RF/ENO Push Button 440 secure

The KNX RF/ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

PTM 210 – Wireless Switch Module

The PTM 210 is a e miniaturized batteryless switch modules (40 mm x 40 mm x 11.2 mm) which allow the realization of very slim on-wall mountable rocker switches or remote controls. Optionally, one or two switch rockers or up to four push buttons can be realized.

PTM 215 – Wireless Switch Module with NFC

PTM 215 is a miniaturized batteryless switch module (40 mm x 40 mm x 11.2 mm) which allows the realization of a very slim, on-wall mountable rocker switches or remote controls. The actuating force is typically 9 N only over a travel of 1.8 mm. Optionally, one or two switch rockers or up to four

Easyclickpro-LED flush-mounted dimmer receiver, bi-directional, 1 channel, with energy metering

ESRPU/ EDRPU – Wireless Switch (902 MHz)

Self-powered wireless controls are simple to install. The Single and Double Rocker Pads use EnOcean energy harvesting technology to communicate wirelessly with other wireless devices and provide convenient control of lighting, temperature and miscellaneous electric loads.

EHSMU – HVAC Setback Module (902 MHz)

The HVAC Setback Module provides an extraordinarily simple, highly efficient means for switching HVAC systems between normal operation and a pre-configured setback mode. The module features two (2) buttons with LED indicator lights that are used to configure or manually control the device. The setback module is easy to install and connects to the HVAC

LEDDU – LED Zone Controller 0-10V (902 MHz)

The LED controller LEDD uses wireless technology to communicate with other self-powered EnOcean-based products and provides an amazingly simple solution for dimming control of LED lighting. It is directly supplied from the auxiliary 12V supply output of a connected LED driver. The compact size enables flexible installation inside of or next to electrical boxes and

LEDRU – LED Relay Zone Controller 0-10V (902 MHz)

The LED relay zone controller uses wireless technology to communicate with other self-powered EnOceanbased products and provides an amazingly simple solution for dimming control of LED lighting. The compact size enables flexible installation inside of or next to electrical boxes and fixtures so it can be easily wired out of sight using standard wiring practices.