EnOcean Easyclickpro flush-mounting receiver, 2-channel, with energy metering

The bidirectional Easyclick receiver can not only receive radio signals, but also transmits back its status every time it changes. Actual ON/OFF switched states can then be visualised e.g. on the handheld transmitter D 450 FU-HS 128. The Easyclick receiver serves to switch lights and other electrical consumers. In addition to the bidirectional functions, the Easyclick receiver variant features an integrated energy meter (energy measuring chip) that can record the energy values of the connected consumer. The momentary power consumption, the operating hours, and the overall electricity consumption can be visualised e.g. on the handheld transmitter D 450 FU-HS 128. In addition, the energy consumption can be depicted as a histogram on an hourly or weekly basis, together with the total consumption and the total costs. The displayed values are a summary of the results from both switching channels.
A range of functions and parameters can be selected:
• two-key operation (standard function ON/OFF)
• one-key operation (ON/OFF changeover)
• button operation (pulse)
• hotel card switch with definable follow-up time
• stairwell light with selectable running time and shutdown warning
• automatic OFF after selectable running time
• fan function with delayed ON and with selectable follow-up time
• save and retrieve 4 lighting scenes at the press of a key (one lighting scene per key)
• window handle and window contact, visualisation also parallel to the switching outputs
• movement detector and light sensor
• A function can be defined individually for each of the max 32 programmed transmitters The channels can be programmed independently of each other.
• Integrated repeater functions (1 level / 2 level) can be switched ON for each project, irrespectively of the set functions
• Separate preassigned functions and parameters when e.g. window contacts, window handles, and movement detectors are being programmed

Technical data:
Own consumption: < 0.5 W (bistable relays)
Transmit frequency: 868.3 MHz
Voltage supply: 100–240 Vac/ 50–60 Hz
Neutral conductor: required
Ambient temperature: -20 °C to +40 °C
Storage temperature: -40 °C to +85 °C
Plugin terminals: max 1 x 1.5 mm²
Housing height: 28 mm
Rating: IP 20
Mounting lugs: for screwing down in switch sockets
Approvals: CE; KEMA/KEUR
Load types 230 Vac (110 Vac)
Incandescent lamps 500 W (250 W)
HV halogen lamps 100 W (50 W)
Motor load 100 VA (50 VA)
EVG load 1 pcs (1 pcs)
The quantity depends on the type and manufacturer. The device’s data sheet must be observed!